Coffee water blend calculator

Few bottled waters meet the Specialty Coffee Association's standard on their own, but a blend often does. Pick two waters, or one and distilled water, and slide to set the mix. The calculator shows the blend's minerals and the share of the first water that would land inside the SCA's ranges, if any.

Measure Water AWater BThe blend SCA target

Mixing is simple averaging: a 50:50 blend has half of each water's minerals. pH doesn't mix that way, so the blend's pH isn't shown. Hardness and alkalinity are worked out from calcium, magnesium and bicarbonate (as calcium carbonate). Distilled water has no minerals, which makes it the easiest way to soften a hard water.

How to use it

Hard, high-bicarbonate waters are the usual problem for coffee. Diluting one with distilled water lowers its calcium hardness and alkalinity together, and the calculator finds the mix where both fall inside the ranges. If there's no such mix, the water's calcium is too low for its alkalinity, and a second water with more calcium and less bicarbonate does better.

The targets are those of SCA Standard 102-2024: calcium hardness 50–175 mg/L and alkalinity 40–70 mg/L, as calcium carbonate, and pH 6–8. The 2009 brewing standard's dissolved solids target of 75–250 mg/L is shown as well. See water for coffee for every water ranked on its own.